Argox AS 8020 Cordless Barcode Scanner




SPECIFICATIONS:

Specifications AS- 8020CL
Light source 630nm Visible Red LED
Optical system 2048 pixel CCD (Charge-coupled device)
Depth of scan field 0-270 mm (Code39, PCS=90%, 20mil)
Scanning width /
Scan speed 300 scan/sec
Resolution 0.1mm (4mil) Code39, PCS=90%, on contact
Print contrast 30% or more
Scanning angle Front: 60 ,Rear: 60 ,Yaw: 75
Decode capability Autodiscriminates all standard barcodes; including GS1 databar Other symbologies can be ordered optionally
Beeper operation 7 tones or no beep
Indicator Green & Red Led (2 more LED for 8020 CL cradle)
Length 187 mm
Width-handle 35 mm
Width-head 75 mm
Depth-handle 33 mm
Depth-head 44 mm
Weight 200g (battery included)
Radio range 100 meters
Radio frequency Type: GFSK Modulation Frequency: 2.4~2.483 GHZ Power: 0.25~2.5mw ; Adaptive Frequency System
Connector type RJ-45 phone jack connector
Case material ABS plastic (over molded at contact pointed)
Input voltage 5 VDC 0.25V
Power - operating 945 mW
Power - standby 150 mW
Current - operating 290 mA @ 3.7 VDC
Current - standby 32 mA @ 3.7 VDC
Operating Temperature 0C to 50C (32F to 122F)
Storage -20C to 70C (-4F to 158F) (battery not included for 8000CL)
Humidity 10% to 90% relative humidity, non-condensing
Light level Up to 45000 lux
Shock 1.5m drop onto concrete (90cm for 8020CL cradle)
Programming method /
Contaminants Seals to resist airborne particulate contaminants ( IP 42 )
Program upgrade Enabled by built-in flash memory
EMC T3A078
Programmable characteristics Code type selection, check digit selection, Decoding option, Transmitted character delay, header selection, trailer selection, message suffix, good read beep tone and volume, scanner trigger selection Keyboard emulation type (intermessage delay, keyboard type and keyboard language) Serial interface type (ACK/NAK, Xon/Xoff, RTS/CTS, good read LED control, start/ stop bits) Cordless type (special cordless transmission character settings for 8020CL & 8520)